FatalErrors.info

Search by Model or by Error Code Search

Error code: 0x02

<- Back

Description:

• CR load positioning lock error.

Possible causes:

• An error occurred in the CR motor operating sequence.

Possible remedy:

• Move the CR Unit by hand, and check to see if it moves smoothly.
• Execute Bi-D Adjustment.
• Execute PF Adjustment.
• Execute PW Adjustment.
• Checking the head FFC for disconnection or breakage.
• Checking the lead wires of the CR Motor for disconnection or breakage.
• Checking the CR Encoder FFC for disconnection or breakage.
• Checking the printer frame for adhesion of dirt or insufficient lubrication.
• Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication.
• Checking the Linear Scale for adhesion of dirt or damage.
• Checking the CR Encoder for adhesion of dirt or damage.
• Checking the PW Sensor for adhesion of dirt or damage.
• Checking the CR Belt for damage or improper tension.
• Checking the CR Motor and replacing it if necessary.
• Checking Main Board and Power Supply Board.