FatalErrors.info

Search by Model or by Error Code Search

Error code: 0x02

<- Back

Description :

• CR load positioning lock error.

Explanation :

• Carriage operation failure due to a disc jam or ink system operation error.
• Inadequate lubrication of the guide shaft or obstructions on the sliding surface.
• Encoder signal abnormality due to a faulty sensor, dirt on the scale, poor contact, or etc.

Remedy :

• Carriage Assembly Operation Check.
  • Is there any obstruction on the Carriage path?
  • Does the Carriage move smoothly when it is moved manually?
• Check the followings. Clean or replace the parts if necessary.
  • CR scale: dirt, damage, installation status, tension.
  • CR encoder sensor: dirt, damage.
  • Carriage shaft, guide: dirt, lubrication.
  • CR belt: damage, tension, loosening of motor fixing screw.
  • Head FFC: connection, damage.
  • Ink tube, Tube guide plate, Clamp: damage, operational abnormality.
  • CR motor cable, Sensor FFC: connection, damage.
  • Printer control board, LPS board: any abnormality.