Error code: 150C
<- BackDescription :
- PG phase detection error.
Causes :
- During PG operation, the PG HP Sensor cannot detect the change of status.
Remedy :
- Check the installation status of the PG HP Sensor.
- Check the connection between the PG HP Sensor and the Main Board Assy.
- Replace the PG HP Sensor.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,1519,Description :
Causes :
- Detects that the motor is still driven even though the firmware sends has commanded it to stop.
- Motor driver failure.
- Motor failure.
Remedy :
- Replace the Main Board Assy.
- Replace the APG Motor.