Error code: 1101
<- BackDescription :
Causes :
- The number of Carriage movement cycles reached the specified upper limit.
Remedy :
- Replace the ink tube (L & R), and clear the counter using the Service Program.
- In addition, check the statuses of the CR Motor, the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the ink tube.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,1138,Description :
Causes :
- The electric current flowing when driving the motor is irregularly large.
- Encoder cable is damaged.
- Motor cable is damaged.
- Irregular load.
- Encoder failure.
- Motor failure.
Remedy :
- Check the connection between the CR Encoder and the Main BoardAssy.
- Check the connection between the CR Motor and the Main Board Assy.
- Replace the CR Encoder Sensor.
- Replace the CR Motor.