Error code: 1139
<- BackDescription :
Causes :
- Detects that the motor is still driven even though the firmware sends has commanded it to stop.
- Motor driver failure.
- Motor failure.
Remedy :
- Replace the Main Board Assy.
- Replace the CR Motor.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,113A,Description :
Causes :
- The electric current flowing when driving the motor is irregularly large.
- Encoder cable is damaged.
- Motor cable is damaged.
- Irregular load.
- Encoder failure.
- Motor failure.
Remedy :
- Check if the Carriage Unit is correctly installed.
- Check if there is some foreign material on the driving section of the Carriage Unit.
- Check the connection between the CR Encoder and the Main Board Assy.
- Check the connection between the CR Motor and the Main Board Assy.
- Replace the CR Encoder Sensor.
- Replace the CR Motor.