Error code: 113F
<- BackDescription :
Causes :
- Detects that it is being driven at an irregularly slower speed than the specified value.
- Encoder cable is damaged.
- Motor cable is damaged.
- Irregular load.
- Encoder failure.
- Motor failure.
Remedy :
- Check if the Carriage Unit is correctly installed.
- Check if there is some foreign material on the driving section of the Carriage Unit.
- Check the connection between the CR Encoder and the Main Board Assy.
- Check the connection between the CR Motor and the Main Board Assy.
- Replace the CR Encoder Sensor.
- Replace the CR Motor.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,1229,Description :
Causes :
- Detects that the motor is still driven even though the firmware sends has commanded it to stop.
Remedy :
- Motor driver failure.
- Motor failure.
- Replace the Main Board Assy.
- Replace the PF Motor.