Error code: 1489
<- BackDescription :
Causes :
- The home position of the Wiper is not detected.
Remedy :
- Check the connection of the Wiper HP Sensor.
- Replace the Ink System Unit.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,148A,Description :
Causes :
- The electric current flowing when driving the motor is irregularly large.
- Encoder cable is damaged.
- Motor cable is damaged.
- Irregular load.
- Encoder failure.
- Motor failure.
Remedy :
- Check if there is some foreign material causing extra load on the Wiper system.
- Check the connection between the Ink System Unit and the Main Board Assy.
- Replace the Ink System Unit.