Error code: 1530
<- BackDescription :
- Driven Roller Driven roller HP detection error.
Causes :
- The home position of the Driven Pulley is not detected. Check the connection of the Roller Release HP Sensor.
Remedy :
- Check if the Driven Pulley rotates smoothly without any overload.
- Replace the Roller Release HP Sensor.
- Replace the Driven Roller Release Motor.
en,Epson,SC-P9000.SC-P7000.SC-P8000.SC-P6000,PRINTER,153A,Description :
Causes :
- The electric current flowing when driving the motor is irregularly large.
- Encoder cable is damaged.
- Motor cable is damaged.
- Irregular load.
- Encoder failure.
- Motor failure.
Remedy :
- Check if there is some foreign material causing extra load on the driven roller release system.
- Check the connection between the Driven Roller Release Motor and the Main Board Assy.
- Replace the Driven Roller Release Motor.