FatalErrors.info

Search by Model or by Error Code Search

Error code: 00010000

<- Back

PF motor encoder check error

This message appears and printer is stopped when the encoder pulse signal is not input at the required interval at power on initialization or during PF motor operation.

• Check Points:
  • No dirt or foreign objects on PF encoder or Scale,PF.
  • No abnormality with PF timing belt and proper tension of the belt.
  • No unusual loads on grid roller rotation.
  • PF motor resistance measurement.
  • Perform encoder check with self-diagnostic program.
  • Harness connections are correct and no shorts or wire disruptions.
• Solution:
  • Replace the PF encoder sensor.
  • Replace the PF encoder.
  • Replace the C362DRV board.