FatalErrors.info
Search by Model
or by Error Code
Search
Error code: 0001001E
<- Back
PF servo parameter error
This message appears and printer is stopped when voltage above required value is about to be output to PF motor.
Check Points:
No dirt or foreign objects (dust, etc.) on PF encoder or Scale, PF.
No abnormality with PF timing belt and proper tension of the belt.
No unusual loads on grid roller rotation.
PF motor resistance measurement.
Perform encoder check with self-diagnostic program.
Harness connections are correct and no shorts or wire disruptions.
Solution:
Replace the PF encoder sensor.
Replace the PF encoder.
Replace the C362DRV board.