Error code: 00010013
<- BackPF overload (high sensitivity) error
PWM has been being output for a certain period of time. This can be made when load on the PF Motor is slightly increased.
Remedy and points to be checked :
1. Check the load on the PF Motor :
- Measure the resistance value of the PF Motor.
- If the PF Motor is found in short mode, replace the MAIN BOARD ASSY at the same time.
- Running load of PF Motor (check by manual operation).
- Rotation load of PF Motor.
2. Replace the PF Motor Assy.
3. Replace the C593 MAIN Board.