Error code: 0001000A

<- Back

CR home position sensor error.

Explanation:
During initial operation at power on or during printing operation, there may be a case where the home position can not be detected at the home position detection timing or within a specified period of time. In such a case, this message is displayed and the printer stops operating.

Cause of trouble:
Shield plate detection error due to no change in the signal from the CR home position sensor.

Points to be checked:
1. Check that the sensor functions properly.
2. Check that the sensor is free from adhesion of any foreign matters.

Remedy:
1. Replace the CR_HP Sensor ASSY.
2. Replace the MAIN Board (C472 MAIN).