Error code: 0001001B

<- Back

Head driver (TG) temperature error.

Explanation:
During printing operation, there may be a case where the temperature inside the print head has risen above the specified value and the thermistor in the print head detects it as abnormal temperature. In such a case, this message is displayed and the printer stops operating.

Cause of trouble:
1. Head broken down.
2. Faulty contact of tape electric wire, broken wire or wire out of position.

Remedy:
1. Turn off the power to the printer once and turn it on again and check for recovery.
2. If the same error occurs immediately or in a short time, replace the print head with a new one.